#600 Performa Hardwood Portable
|
| Panels | Treatment | Accessories | |||||||||||
|
2 coats of polyurethane lacquer have been applied to all surfaces and edges. | 1/8" foam pad loose Slip Tongue Perimeter Trims (Metal Corner Pieces and Reducers) | |||||||||||
|
Laying:
Each panel has a tongue along one longside -- the owher 3 sides are grooved. Panels have been furnished with a universal fitting installed in the middle of the panel at the tongue-side. When laying the floor the assembling fitting will grip into the groove on the back of the adjacent panel and will thus hold the panels together in the longitudinal as well as the transverse direction. Finally the loose tongue should be inserted at the end joint. When the floor has been laid, place metalband around the panels thus forming a strong and pretty frame aroud the surface. Use the rubber hammer to place metalband in the right position. Storage: The panels should - when not used - be stored in a dry room and should be laid or stabled insuch a way that no tensions arise or the humidity effect differs from the front to the back. |
| back |
| Dance Equipment International shall not be responsible or liable for personal injury or property damage incurred by or through the use of our equipment or for costs related to the delay, damage or installation of its flooring or any other equipment or products sold by us. |
